Genuine Ford Parts - Page 40

**FairmontGS** · 06-01-2023, 09:59 AM

Hi GT, I'm going to buy a dash mat for the 2011 WT Fiesta off fleabay, but the prices are all over the place (very cheap to expensive). Was there a OEM offering and what did it cost please? Just looking for a reasonable product.

Many thanks

https://www.ebay.com.au/sch/i.html?_...n%3AWT&_sop=15

GTLEGEND · 06-01-2023, 11:08 AM

Quote:

Originally Posted by FairmontGS

Hi GT, I'm going to buy a dash mat for the 2011 WT Fiesta off fleabay, but the prices are all over the place (very cheap to expensive). Was there a OEM offering and what did it cost please? Just looking for a reasonable product.

Many thanks

https://www.ebay.com.au/sch/i.html?_...n%3AWT&_sop=15

Hey mate,

There was never a genuine dash mat option for WT Fiesta..

GT

Citroënbender · 17-01-2023, 10:01 AM

Is there a particular spec (part number) for the front lower control arm ball joint nut on a Territory, pre-facelift?

As in, the nut for those infamous balljoints.

I’m not going to reuse old nuts on new arms, and it looks like the vendors of surplus stock arms are supplying them without.

GTLEGEND · 17-01-2023, 10:12 AM

Quote:

Originally Posted by Citroënbender

Is there a particular spec (part number) for the front lower control arm ball joint nut on a Territory, pre-facelift?

As in, the nut for those infamous balljoints.

image

I’m not going to reuse old nuts on new arms, and it looks like the vendors of surplus stock arms are supplying them without.

116 Nm Must be torqued correctly, have seen when they are not torqued correctly the shaft below the thread is broken clean above the taper..

Citroënbender · 17-01-2023, 10:15 AM

Cheers, what part number to buy for new ones?

GTLEGEND · 17-01-2023, 11:01 AM

Quote:

Originally Posted by Citroënbender

Cheers, what part number to buy for new ones?

Nut has part number SX805479A..

Citroënbender · 17-01-2023, 11:22 AM

Thanks - if you can supply a pair of these nuts this week, please PM me the cost and I’ll transfer it.

Citroënbender · 18-01-2023, 02:54 PM

When your nuts are on the line, count on GTLEGEND.

Thanks, as always, for speedy service - good advice - happy prices.

GTLEGEND · 18-01-2023, 03:23 PM

Quote:

Originally Posted by Citroënbender

When your nuts are on the line, count on GTLEGEND.

image

Thanks, as always, for speedy service - good advice - happy prices.

Glad and happy to help where I can..

bluecarford · 20-01-2023, 09:59 AM

Hello GT
Not a big part but I am chasing a screw and the screw cover for the taillight in the boot lid spoiler on my 2014 FGX XR8.
If you have them, I will grab a couple of each, so I have a spare.
Thank you.

GTLEGEND · 20-01-2023, 10:47 AM

For Frankie86

2021 Escape Keys.png

GTLEGEND · 20-01-2023, 10:56 AM

Quote:

Originally Posted by bluecarford

Hello GT
Not a big part but I am chasing a screw and the screw cover for the taillight in the boot lid spoiler on my 2014 FGX XR8.
If you have them, I will grab a couple of each, so I have a spare.
Thank you.

Hi mate,

From what I believe, these are only available as part of the whole light assembly, never sold as a separate part. Unless we can work out if the fastener is used somewhere else on the vehicle, we are unable to get separately.

GT

bluecarford · 20-01-2023, 12:12 PM

Ok Thanks very much GT for the quick reply.
The few other places I tried haven't rushed back to me and now I understand why. I will have to try and make do with a generic screw - but the cover might be a bit trickier.
Thanks again.

**FoxtrotGolfXray 5.0** · 20-01-2023, 02:20 PM

Quote:

Originally Posted by bluecarford

Ok Thanks very much GT for the quick reply.
The few other places I tried haven't rushed back to me and now I understand why. I will have to try and make do with a generic screw - but the cover might be a bit trickier.
Thanks again.

Use a bit of clear nail polish on the thread when you refit the screw (as well as the old one still there) and should never come out of it's own accord again. But still easy enough to remove when needed. Cheap version of loctite. Taught to me by my old man who was a RAAF instrument fitter, so pretty sound recommendation.

bluecarford · 20-01-2023, 05:47 PM

Thank you

bondy99 · 21-01-2023, 03:16 PM

GTLEGEND,
I have a plastic (chrome looking), boot lifter on the AU2 (Year 2000), the part that holds the rear number plate light fitting. Also has the "Ford Badge" in the middle. My apologies for not knowing the proper name of that item.

I would like to get it replaced with the same chrome type, the studs or mounts that hold
the item onto the bootlid has been broken long time ago. Can only do so much with superglue.

Cheers.

GTLEGEND · 21-01-2023, 03:57 PM

Quote:

Originally Posted by bondy99

GTLEGEND,
I have a plastic (chrome looking), boot lifter on the AU2 (Year 2000), the part that holds the rear number plate light fitting. Also has the "Ford Badge" in the middle. My apologies for not knowing the proper name of that item.

I would like to get it replaced with the same chrome type, the studs or mounts that hold
the item onto the bootlid has been broken long time ago. Can only do so much with superglue.

Cheers.

The chrome boot mould changed 3/2000. Up to 2/2000 they used ERF43504C, from 3/2000 they used AU2F43504E.

Either or they both no longer available, so need to keep any eye out on eBay or the alike.

bondy99 · 21-01-2023, 04:15 PM

Quote:

Originally Posted by GTLEGEND

The chrome boot mould changed 3/2000. Up to 2/2000 they used ERF43504C, from 3/2000 they used AU2F43504E.

Either or they both no longer available, so need to keep any eye out on eBay or the alike.

Ok,
Thanks for that. On the VIN build date said June 2000. I guess mine would be the latter one.

FPV 460 · 23-01-2023, 11:54 AM

gday GT, can you please supply part number, availability and cost for the drivers side A/C blend door actuator for a 2011 fg my10. thanks in advance.

GTLEGEND · 23-01-2023, 01:22 PM

Quote:

Originally Posted by FPV 460

gday GT, can you please supply part number, availability and cost for the drivers side A/C blend door actuator for a 2011 fg my10. thanks in advance.

Hey FPV460,

If I am thinking of the same part you are, it should be BA19E694A. If you can confirm thats what you are after, they are available, $400 plus postage.

GT

FPV 460 · 23-01-2023, 04:11 PM

thanks for that info. a bit pricey for me so i will try to source a second hand one. cheers.

FroudeyBrand · 28-01-2023, 04:35 PM

Question? Did Ford change wheel arch liners fronts from BA to BF just did a wreckers run and I swear left and right both off BAs I assumed but they screw up to the lower number different just curious if part numbers are same or different

GTLEGEND · 29-01-2023, 01:44 PM

Quote:

Originally Posted by FroudeyBrand

Question? Did Ford change wheel arch liners fronts from BA to BF just did a wreckers run and I swear left and right both off BAs I assumed but they screw up to the lower number different just curious if part numbers are same or different

Same part number for both front wheel arch trims on BA/BF.. should be no difference.

Bossxr8 · 02-02-2023, 11:35 AM

Hi GT.

Trying to get hold of some Territory rear brake pads. My local dealer told me they don't have them anymore. This can't be true right?

Also I was trying to get hold of some upper control arm bushes for FG G6ET, but apparently only come in an expensive kit. I'm assuming by kit they mean the bushes only come with new control arms as well? And the bushes can't be purchased on their own?

GTLEGEND · 02-02-2023, 02:03 PM

Quote:

Originally Posted by Bossxr8

Hi GT.

Trying to get hold of some Territory rear brake pads. My local dealer told me they don't have them anymore. This can't be true right?

Also I was trying to get hold of some upper control arm bushes for FG G6ET, but apparently only come in an expensive kit. I'm assuming by kit they mean the bushes only come with new control arms as well? And the bushes can't be purchased on their own?

Hey Bossxr8,

You need to find another dealer. Rear pads for a Territory are all the same from SX through to SZ2 and are still readily available. There are two choices of either genuine OE style or the Motorcraft pad option as well.

As for the upper control arm bushes, correct not available as stand alone bushes, only as complete arm assembly which is arm/ball joint/bushes/brackets.

Bossxr8 · 02-02-2023, 03:25 PM

Quote:

Originally Posted by GTLEGEND

Hey Bossxr8,

You need to find another dealer. Rear pads for a Territory are all the same from SX through to SZ2 and are still readily available. There are two choices of either genuine OE style or the Motorcraft pad option as well.

As for the upper control arm bushes, correct not available as stand alone bushes, only as complete arm assembly which is arm/ball joint/bushes/brackets.

I knew he was full of crap. One of these useless parts guys who can't do anything without a rego number or vin. i wanted to talk to the other guy there who is an absolute guru and knows exactly what you want and how to get it. Should have just waited to talk to him.

How much can you do a set of those pads for? Next closest dealer is 45 mins away so not worth the drive.

GTLEGEND · 02-02-2023, 04:27 PM

Quote:

Originally Posted by Bossxr8

I knew he was full of crap. One of these useless parts guys who can't do anything without a rego number or vin. i wanted to talk to the other guy there who is an absolute guru and knows exactly what you want and how to get it. Should have just waited to talk to him.

How much can you do a set of those pads for? Next closest dealer is 45 mins away so not worth the drive.

So the OE ones are $290 plus postage (around $14 I think).

The Motorcraft ones $60 plus postage as above.

Bossxr8 · 03-02-2023, 10:48 AM

Quote:

Originally Posted by GTLEGEND

So the OE ones are $290 plus postage (around $14 I think).

The Motorcraft ones $60 plus postage as above.

Huge price difference. They are most likely the same part?

GTLEGEND · 03-02-2023, 11:40 AM

Quote:

Originally Posted by Bossxr8

Huge price difference. They are most likely the same part?

Definitely not the same part..

KRISL · 04-02-2023, 09:18 AM

Quote:

Originally Posted by GTLEGEND

Definitely not the same part..

Wow at that price difference, I thought Motorcraft was a ford part supplier, and as good quality?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode