Geez! I hate that!

[HIPO]

Ahhhh, fixed. Praise be!

[DFB FGXR6]

Originally Posted by HIPO

No coffee beans!!!!! tried instant, bag & tea, all taste like shite... off to the stinking supermarket.

For some reason, I've gone off coffee lately (instant, pods or espresso). A cup of tea feels so right for me at the moment.

[onemanempire]

Going to Bunnings to deliver 2 pallets of goods, I arrived at 1.55pm and left Bunnings at 5.05pm.. Grrrr, oh well, getting paid by the hour so can't complain to much... There has to be a better way.


This is what I saw when I rocked up: He was unstrapping to be unloaded, the forklift op was on lunch break. Why is there only one forky?




This is what was behind me...

[onemanempire]

A pic is worth a thousand words...

[HIPO]

Originally Posted by DFB FGXR6

For some reason, I've gone off coffee lately (instant, pods or espresso). A cup of tea feels so right for me at the moment.

Yes comes & goes with me too, but this is my longest run on coffee ever!

[HIPO]

Originally Posted by onemanempire

Just to ad some clarification, I did clean the part before returning it, (sorry, must have been busy when posting) and the return was accepted with no probs, and a full refund given.


End of saga. I did get a response from Autopro today (24/6/2024) that reads:


"Hi one man,

Our apologies if you have not heard anything back about the issue.

We have followed it up to the team and requested for updates.


Regards,
Danilyn"


Hmmm, nice engrish


One Man.

I have a few bits & pieces on my non returnable "disappointment shelf"... (:

[Itsme]

Originally Posted by onemanempire

Going to Bunnings to deliver 2 pallets of goods, I arrived at 1.55pm and left Bunnings at 5.05pm.. Grrrr, oh well, getting paid by the hour so can't complain to much... There has to be a better way.


This is what I saw when I rocked up: He was unstrapping to be unloaded, the forklift op was on lunch break. Why is there only one forky?
image



This is what was behind me...
image

Consider yourself lucky you are on an hourly rate, where I work, I've seen owner drivers sitting for up to 12 hours at times to be loaded, and no, they don't get paid for it, if they do get demurrage rates, it is pittance.

[roKWiz]

While I had the day off away from home, thought I would colour match some wider rear 12 slotters i bought to the existing S pac ones on the car.

So into Repco why, why did I go there ? They reckon they sold the same colours as Duplicolor (DSF 30) tins.

This is the lid sitting on my wheel. Not bad I thought, probably happy until I get the right stuff.



and painted, not remotely like their lid colour. Thanks, probably be another 3 years before I walk into another Repco.



Supercrap, can't find the colour code for Goldrush and lost the Duplicolor franchise to Autobarn/zone.

Looks like a wait until the next trip to Albury or Shepp depending on where we'll be then.

[DFB FGXR6]

Originally Posted by DFB FGXR6

And so, another Friday, another stream of village idiots...................

This afternoon, a lady bailed me up to ask about the bare rooted roses that I was putting into stock. You know those random "conversations" that go on and on, where you simply listen and nod but don't get a word in? One of those................Did we have this variety, do we have that variety, I planted xyz-rose 15 years ago and can't find them anymore, one of my roses died this summer, show me how to prune them.......................in the end, I offered to leave her to have a look around, que: I'm done listening, to which she said that she didn't smoke, didn't drink, DIDN'T CHASE MEN AROUND, she could afford to buy lots of plants....................ok then....................

Another somewhat eccentric gentleman was in for some bare rooted trees. We picked out what he wanted before asking if I was one of my boss's father! Gee, thanks! I'm closing in on 40, but I didn't think I had weathered too badly for a 37-year-old. But apparently, I look old enough to be my 55-year-old boss's father. He then had the cheek to ask for discount. Usually, it works better when complimenting the salesman instead of insulting them.

Yep, another Friday of nitwits, today one in particular had the boss quite agitated. (This particular lady I didn't originally serve.)

In this case, the customer asked for a particular tree, was taken over and show what we have, then asked for the staff member to choose one for her, to which she clearly agreed with because she bought it.

Two days later, we get an email from her with the tree planted and secured with a flimsy bamboo stake. Her email included an image, to which she used to illustrate that the trunk is not straight, then complained that she paid $100 for it and what would we be doing to compensate for the slight bend in the trunk. (All trees have a some form of wiggle in the trunk)

Today, she phoned looking for an argument and expecting a full refund. "Sure, bring the tree back and we'll exchange or refund the price. But no, she wanted a discount because she lives 3 hours away. That was despite being told the stake was insufficient, that in general, trees typically straighten and strengthen over time. Again, this was not acceptable in her mind.

In the end, the boss told the customer that we are not in the business of allowing customers to dictate what price or discount they are going to get.

What p.ssed me off though was that she shown several to choose from, bought it, took it home, then went ahead planting and staked it, only then determining it wasn't straight. But no, apparently because "you chose it for me", that meant she was still entitled to a refund without returning the item. She made the decision to buy it, was given a reasonable explanation of how and why, offered our usual exchange/refund policy that EVERY other customer is entitled to. But no, she was entitled to "special" treatment.

It's funny, a recent addition to the team has previous experience at Bunning's. The stories I heard regarding the returns policy, warranty claims and stock leakage paints a vivid picture as to why customers are so entitled these days. The unrealistic expectations and entitlement are vastly different to when I started in retail 20 years ago.

[ford71V8]

* will be tuning in for next Fridays instalment.

Who complains about not having straight trees?

[DFB FGXR6]

Originally Posted by ford71V8

* will be tuning in for next Fridays instalment.

Who complains about not having straight trees?

Its nearly always someone above the age of 50 that insists on straight trunks, usually males. That's not agism or sexism on my part, just my observation over 20+ years doing this job.

[1970XW351]

To be fair, a straight trunk over the age of 50 can be a concern for some blokes, so I can see where they might be coming from...

[marty351]

Originally Posted by DFB FGXR6

Yep, another Friday of nitwits, today one in particular had the boss quite agitated. (This particular lady I didn't originally serve.)

In this case, the customer asked for a particular tree, was taken over and show what we have, then asked for the staff member to choose one for her, to which she clearly agreed with because she bought it.

Two days later, we get an email from her with the tree planted and secured with a flimsy bamboo stake. Her email included an image, to which she used to illustrate that the trunk is not straight, then complained that she paid $100 for it and what would we be doing to compensate for the slight bend in the trunk. (All trees have a some form of wiggle in the trunk)

Today, she phoned looking for an argument and expecting a full refund. "Sure, bring the tree back and we'll exchange or refund the price. But no, she wanted a discount because she lives 3 hours away. That was despite being told the stake was insufficient, that in general, trees typically straighten and strengthen over time. Again, this was not acceptable in her mind.

In the end, the boss told the customer that we are not in the business of allowing customers to dictate what price or discount they are going to get.

What p.ssed me off though was that she shown several to choose from, bought it, took it home, then went ahead planting and staked it, only then determining it wasn't straight. But no, apparently because "you chose it for me", that meant she was still entitled to a refund without returning the item. She made the decision to buy it, was given a reasonable explanation of how and why, offered our usual exchange/refund policy that EVERY other customer is entitled to. But no, she was entitled to "special" treatment.

It's funny, a recent addition to the team has previous experience at Bunning's. The stories I heard regarding the returns policy, warranty claims and stock leakage paints a vivid picture as to why customers are so entitled these days. The unrealistic expectations and entitlement are vastly different to when I started in retail 20 years ago.

I wonder if she's tried returning her husband to the marriage celebrant?

[DFB FGXR6]

Originally Posted by 1970XW351

To be fair, a straight trunk over the age of 50 can be a concern for some blokes, so I can see where they might be coming from...

I was waiting for that comment.

Originally Posted by DFB FGXR6

Its nearly always someone above the age of 50 that insists on straight trunks, usually males. That's not agism or sexism on my part, just my observation over 20+ years doing this job.

I should clarify that a tree not having a straight trunk is a valid concern when selecting a tree. But, trees are a live product that are generally all grown in fields before being "harvested" for sale, so there is ALWAYS going to be some deviation from a completely straight stem, some species more so than others. In the case of our customer, there would have been less the 10mm deviation, which generally grows out as the tree matures.

This all stems from customers thinking that plants are like any other household purchase, which is silly because they are a living/evolving thing not a doorknob or kitchen benchtop.

[1970XW351]

Originally Posted by DFB FGXR6

I was waiting for that comment.

I tried several times to not post it, but it got the best of me in the end.

I get what you meant though and would be equally bewildered by somebody cracking a nana over a natural, living thing being slightly out of kilter. The World surely is full of "interesting" folks.

[swamp]

hi all
Ford want us all to buy new trucks often . LOL
Look under your Ranger BT50
The worst genuine backyard job u could find chassis paint
The chassis paint is straight to metal
Paint thickness is very patchy some thin some thick areas mostly thin i


-------Chassis paint not suitable,, as corrosion grows under paint = porous
-----welds not treated or preped in any way = corrosion hot spot
------ window gaps vary 0mm---6mm

Industry
blasts [provide texture for paint adhesion ]
..cleans ,, epoxy primes and urethane top coats
or
galvanizes

Ford could learn something

Looking at some used vehicles have rusted thru chassis by 120,000km lol
************FORD Hve used cheap box trailer paint

[DFB FGXR6]

Working outdoors has its perks, just not on frosty early morning winter starts. My "week" started on Wednesday with -2, with each morning afterwards a bitter -1



At least the days have been pleasant.

[Tassie f100]

Originally Posted by DFB FGXR6

Working outdoors has its perks, just not on frosty early morning winter starts. My "week" started on Wednesday with -2, with each morning afterwards a bitter -1

image

At least the days have been pleasant.

We have had -3 to -5 for the last 8-9 mornings,but sunny warmer days

[Citroënbender]

Yes, a friend in Launceston sent me some great photos of the dawn frost. Wouldn’t want to slip on the concrete paths!

[DFB FGXR6]

Originally Posted by Citroënbender

Yes, a friend in Launceston sent me some great photos of the dawn frost. Wouldn’t want to slip on the concrete paths!

I remember the -6 we got many years ago, froze the paths and created a skating rink. All the display bird baths were frozen over.

In terms of protecting the plants, its a multi-step approach. Firstly, vulnerable plants are sprayed with an anti-transparent polymer coating, this increases frost tolerance by an additional 4 Degrees. The breaks down over time, so needs to be reapplied every 4 to 6 weeks depending on exposure to sunlight.

https://www.pestrol.com.au/buy-onlin...nt-protectant/

Even with Envy, we will also cover plants with old sheets, hessian or tarps. Putting those on is the easy part, lifting the wet and frozen sheets is torture on your hands.

Thirdly, we have a frost program for the overhead watering system, which is used to limit the frost from settling and burning through the foliage, hence why everything is wet. Even still, the droplets of water end up freezing as per below...................

[Citroënbender]

You’d get through a stack of that product at 1:10 dilution! Glad someone else is paying the bill.

[Tassie f100]

Liawenee up in the central highlands has been down to -13-14 over the last few days.Great lake hotel,has to close until next Tues because all the plumbing is frozen,so no running water.

[DFB FGXR6]

Originally Posted by Citroënbender

You’d get through a stack of that product at 1:10 dilution! Glad someone else is paying the bill.

We buy a similar product called WiltNot in 20-litre drums from a wholesaler, used at 50ml per litre. Takes about 15-litres to treat all vulnerable plants per application, usually done twice through winter.

https://gardencityplastics.com/plant...0-litre-ncwn20

The alternative is frost damaged plants, which simply won't sell with visible burnt foliage, which then flows onto increased staff labor to bring them back to saleable condition in the spring.

At the end of the day, it's just a cost of doing business, like servicing a company vehicle or buying office supplies.