Twin piston 355mm brake kit

[NCII40]

Will the C5 corvette front brakes work ? i was gonna import some from the states

[FLOORED]

Originally Posted by NCII40

Will the C5 corvette front brakes work ? i was gonna import some from the states


image

Should be ok but you would have to make brackets for them. Just make sure they fit the correct thickness rotor you are going to use as well.

[383hq]

Originally Posted by NCII40

Will the C5 corvette front brakes work ? i was gonna import some from the states


image

If memory serves correctly, PBR (vic) made them for C5, essentially same as the HSV, and were for 32mm thick rotors - if correct, this might help if you find some locally (and save you time linishing "Corvette" off the casting)

[FLOORED]

Originally Posted by 383hq

If memory serves correctly, PBR (vic) made them for C5, essentially same as the HSV, and were for 32mm thick rotors - if correct, this might help if you find some locally (and save you time linishing "Corvette" off the casting)

They did make them for HSV but also Toyota along with Ford. The rotor sizes varied but were all 32mm thick as you mentioned but they all had a different mounting cradle to suit the different offsets and rotor diameters. They no longer make this caliper and are very hard to find unfortunately.

[NCII40]

Originally Posted by 383hq

If memory serves correctly, PBR (vic) made them for C5, essentially same as the HSV, and were for 32mm thick rotors - if correct, this might help if you find some locally (and save you time linishing "Corvette" off the casting)

Originally Posted by FLOORED

They did make them for HSV but also Toyota along with Ford. The rotor sizes varied but were all 32mm thick as you mentioned but they all had a different mounting cradle to suit the different offsets and rotor diameters. They no longer make this caliper and are very hard to find unfortunately.

Found a set of PBR blues


Legend Cheers for helping out






Just need these brackets to fit 355mm discs now