|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
28-07-2011, 07:18 PM
|
#1 | ||
|
Call me Spud
Join Date: May 2008
Posts: 1,995
|
So today I took my Fairmont in to have the plugs replaced (car done over 100k and they were still original, so I figured get it done) 5 of them were pretty siezed in but it was finished. However while I am there we put it up to look at rear bushes because of knocking. Check the left all good, check the right, all nice and tight, nothing loose or worn, however we suddenly look at the right rear shock again, and the bolt that hold the bottom of the shock etc (not sure what it is called) has been put back in the car back to front, so the bolt is actually rubbing the shock, rather than creating a gap. Thankfully it has not yet put a hole in the shock, just a dent, but it is being fixed tomorrow. Not sure who the last person to do any work there was but they need shooting. Surely you re check, you don't just tighten and walk away?
|
||
|
|
Some mechanics need shooting
Linear Mode
